Double Glazing Seal Repairs
If the seals of double glazing windows have been damaged they could cause damp and mould. This could cause damage to the frame and wall surrounding it, and it can also affect your health.
Fortunately, most uPVC windows can be repaired by resealing, rather than replacement. A glazier will clean the frame and glass of the window, apply a new bead, and smooth it.
Water Leaks
Window seals are designed to keep moisture out of your home. However, when they start to wear down, it can cause water leaks around your windows. Not only is a leaky window irritating, but it can cause significant damage to your home's structure. It is essential to recognize a problem early and have it repaired by a professional before it gets any worse.
The cause of windows that leak is usually not in the glass but on the frame or sill. This is the most typical sign of a leaky seal. It could be caused by damage to the seal due to weather or aging wear-out caulking, or even a blocked drain section resulting in an accumulation of ice or water.
Another indication of a window seal failing is the appearance of water between the panes of your double-glazed windows. Although, this isn't as dangerous as a leak, since the water doesn't travel far enough to enter your home. However, it could indicate that the inert gas sandwiched between the panes of glass has leaked out which will reduce the insulation value of your windows.
The final common sign of a damaged window seal is condensation between the panes. This may be caused by an ineffective window seal or it could be due to the humid climate of your home or an issue with the glass. The condensation might not just be irritating but it can cause the growth of mould and mildew in your home which is very difficult and expensive to remove.
It's time to inspect your double-glazed windows if you see these indications. Repairs or replacements will ensure your home is protected from water leaks, lower energy bills, and keep out draughts. It's a small cost to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window to discuss your options for window seal replacement or repair. Our staff is always ready to help! double glazing repairs near me serve homeowners in the Mid-Atlantic.
Condensation
A broken double-glazing seal can let water in the space that is used for insulation. This water can cause condensation within the window panes. It could also result in fogging or misting.
If you notice condensation inside your home It's time to call a double glazing repair service. Condensation can be an indication that the vacuum seal installed at the factory failed and water has gotten into the insulation.
Condensation can be caused by range of causes, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. There are a variety of options for repairing double glazing seals However, it is crucial that the new seals are correctly size to ensure an ideal seal and a perfect fit.
Typically, the gaskets that are used to seal the gaps between double-glazed units are constructed from polyurethane foam. They are designed to last a long time, but can be damaged in time as a result of natural wear and wear or exposure to fluctuating temperatures and weather conditions.
As time passes the foam can shrink or crack over time. This could lead to cracks in the seal and allow moisture to enter the double-glazed window. This not only creates condensation, but can also result in an increase in energy efficiency, meaning that you're losing heat from your home to the outside air.
Re-sealing the windows is one way to fix this problem. This is not a sure fix as it will only remove the existing condensation, and not address the underlying problems that cause the double-glazed window to leak or develop condensate.
Another option is to have your windows replaced completely and this should be done by a professional that offers an insurance backed guarantee. If the company fails, you're still protected by insurance. It's important to know that your replacement windows must have a warranty of at minimum 10 years.
Misting
Make sure that the seals on your double-glazing are in good condition as autumn approaches. Seals that have damaged can affect your windows' insulative properties, but also cause condensation, mold and dampness. It's important to fix any problems in your double-glazed windows as soon as you can to prevent further damage and save money on energy costs.
A typical double-glazed window is constructed from two glass panes held together by an internal space filled with gas. The sealant layer on the outside fills in the gap between the uPVC frames and the glass. This is vital to ensure the air-tight seal that keeps warm and cool air from your home and helps you save money on your heating costs. These seals are susceptible to damage over time because of weather conditions, aging or poor installation. After this the encapsulation formula that makes your double glazed windows so effective can begin to deteriorate.
If damaged or faulty seals are not fixed they could cause dampness and condensation, which could affect your health as as the appearance of your window. Damp and mould not only cause damage to your walls, floors and ceilings but can also cause irritants and allergens within your home that could cause harm to you and your family's health.
One of the most common problems that can happen to your double glazing is misting between the panes. This happens when moisture is absorbed inside the insulated section of your windows. It can be difficult to fix without professional double glazing repair.
There are DIY methods of tackling this problem, however, we'd advise against it because it's not just risky but also extremely messy and damage your windows. These methods involve drilling holes into your glass units and then using chemicals to eliminate the fog and condensation. This could lead to a variety of complications, including exposure of your windows and units to water damage.
Professional glaziers have the expertise, tools and experience needed to effectively reseal your uPVC frames and provide you with long-lasting results. They can also offer tips on how to keep your uPVC window in good condition to avoid future problems.
Draughts
A draft that is coming from your window is a sign that the sealant is likely to have been damaged. It should be repaired or replaced. This will block cold air from entering your home. It will also improve energy efficiency, lower heating bills, and increase comfort.
It is also important to remember that not all drafts originate from the window seals themselves but rather from the gap between the frame and the bricks. In some instances it is possible to repair this by filling the gap with silicone caulking. If this is not successful it will need to be resealed professionally.
If the sealant around a double-glazed window starts to break down, it allows for water ingress and can cause damp or even mold in certain instances. This could affect health and cause damage to the property. If you find any issues with water intrusion, you should take action promptly. If your windows are covered by a guarantee, it's worth checking to find out if the company that supplied them will be able to cover the cost.
The windows themselves are typically covered by a guarantee that could last for a minimum of 10 years However, some businesses offer lifetime warranties - so it's worth looking into this information. If your double glazing is under warranty, it's worth calling the company you bought the windows from as soon as possible and providing them with the details of any issues you're experiencing. It is recommended to contact the company in person or via email and letter. This will ensure that everything is recorded and clear.
Also, it is worth noting that draughts are usually caused by defective hinges and not by the lack of seals that are effective. The hinges cover the window sash, which is the section you open. If they're not regularly oiling them, they can become stiff. This can cause a gap to be created between the sash frame and the sash, allowing cold air to enter the home. This issue can be fixed by replacing the hinges, without impacting window seals.